More Kumihimo with Wire

I do enjoy making these neck pieces out of wire, especially 20 gauge. The available wire colors are a joy to work with. Unfortunately, the photo doesn’t show there is a steely bronze colored wire along with the blue. I think adding the additional color adds depth to the color of the overall piece.

One of the challenges I have had since I’ve started using wire is to be able to create a braid with 18 gauge wire. I do have a difficult enough time managing the tension using 20 gauge but the 18 gauge always eluded me. As I was going through one of my books, however, I spotted a structure that might help me overcome my problem.

This is my first semi-success with 18 gauge wire. Now that I have created a braid with it I think I’ll put that challenge aside.

More Wire Concepts

Have spent some time on a new wire kumihimo design. I think I like this one. It is done with 2 colors of 20 gauge wire. It easily slips on and lays very nicely. Time to make a couple more. I ordered some new wire colors and am anxious to see how they look.

Felt Cuff with Kumihimo

Thought I would try to add a band of kumihimo to a felt cuff. Used the same structure as Kumihimo Concept and braided a short tube of wire. The length of the tube I had made was too long for how I wanted it placed. So I kept snipping it shorter until it seemed to be the correct size. As there was nothing to keep the tube from unraveling, it needed to be tacked in place. Used a few beads while I did that. An interesting look. If I do this again the next tube should probably be the length of one wrap.

Kumihimo Concepts

As I was looking through a book of beautifully created neckwear, I ran across a piece that looked as though it was made with a kumihimo technique using wire. All the photographs in the book identified the materials used in these pieces but not the technique. While I have been doing wire pieces for a while, I hadn’t done anything using the structure shown. I decided a bracelet would be an interesting piece to try.

After making my bracelet I determined the gauge of wire used in the neckpiece was a bit thinner but for a bracelet, heavier is better. The braid structure appears, however, to be identical. This convinced me that the piece in the book was indeed done using a kumihimo technique. Now my challenge will be to make a bracelet that is wearable. This one will sit on the wrist and, as long as there is no movement, it stays there. Since we all move around, however, that challenge needs to be addressed. Will post my results.